Garage door maintenance
A garage door is essential to every home, so giving it the proper maintenance is always recommended. This article post will give you some tips and advice on how to service a garage door and why hiring a trustworthy garage door repair company is a must.
Listen for unusual sounds from the springs on your garage door.
When you open your garage door, listen for any unusual sounds from the springs. If you hear a squeaking or rattling noise, or if it sounds like something has come loose and is hitting the side of the door, this could be a sign that something is wrong with your spring mechanism.
Squeaking: The squeak can be caused by one of two issues: excessive tension in the springs or too much friction between parts of the assembly (this friction can cause a buildup of dirt). To fix this issue, lubricate all moving parts and tighten any loose bolts as needed.
Rattling/clanking: This is usually due to a bent pawl tooth on either side of each spring assembly that holds your door open when it's raised halfway up its track. If this happens, the pawl should be straightened out; otherwise, it might not engage properly when activated later on down the road!
Call a professional garage door repair company if basic troubleshooting doesn't work.
Check the condition of your rollers before attempting more serious repairs.
If your rollers have rust or other imperfections, they will need to be replaced. If the rollers are in good and smooth condition, you can use a wire brush to clean them. If you need to know if your rollers are in good shape, it is better to call a professional garage door repair company to inspect them.
By giving your garage door proper care and maintenance, they will last for years to come.
If you have a chain or belt-driven opener, ensure it is properly aligned.
If you have a chain or belt-driven opener, make sure it is properly aligned. It is recommended to check every once in a while the chain or belt every day to see if it is frayed or broken.
Make sure the chain or belt is not rubbing against the door as it goes up and down. If this happens, reposition the bracket that holds up the opener to move it away from where your garage door rubs against walls when going up and down. This can be done by moving bolts with channel locks to change how far apart they are from each other (the more room there is between them, the less likely your garage door's movement will cause damage). Do not tighten these bolts too much; leave them loose enough so that you can still twist them after positioning them properly without breaking anything off!
Make sure there isn't any extra space between pulleys—this could allow one side of an opening pair of doors (like double doors) to get caught when they close because they aren't lined up correctly anymore due to their different sizes/shapes.
If you notice anything wrong, schedule an inspection by a reputable garage door repair company. They will be able to determine the garage door's condition and make all the necessary repairs.
Make sure that your weather seals are in good condition.
Ensure that your weather seals are in good condition. Weather seals can be damaged by water, dirt, sun damage, insects, or animals. Weather seals can also become damaged over time due to age.
Comments
Post a Comment